Members!  Send in Digital photos of your recent project.  We can update this with new pictures as your project progresses.
Pictures should be 1280 pixels X 960 pixels (Standard digital photo size). 

Include year and model in your email, and the start and projected end date of your project.

 

 

Replacing Qtr Panel Inserts on Ken's '57

bulletThis is something I'd been meaning to do for a long time. 
bulletIt was fairly easy and made a nice difference with the new gold emblems.
bulletI used the Danchuk part number 573S.
bulletPosted 3/21/2015

Gallery of Project

 

 

Michelle Bernal's 1955 Nomad LED light conversion

bulletI had noticed Mark Longshore's very cool LED lights on his car, and he offered to install them for me if I ordered them and sent me the Danchuk URLs with the correct order info.  Attached are the pics from installation day at Mark's place this January. I wanted to publicly acknowledge and thank Mark during a meeting when we are both there but this is a great way to share a project and thank him also.
bulletPosted 2/21/2015  

Gallery of Project

 

 

 

Ken's '57 Project

bulletCorvette LS1 5.7L/4L60E swap for stock 283/Powerglide 2 speed

Some highlights of the build:

bullet Bowtie Overdrive 4L60E Level 2 Automatic Transmission
bulletAluminum custom crossflow radiator with dual automatic fans
bulletCustom Cold air intake with integrated MAF
bullet Vintage Air Frontrunner bright pulley kit for LS1
bullet9" narrowed rear end, 3.55 ratio with Posi-traction
bulletRushforth 9" Rims rear, 7" up front - not tubbed
bulletCustom Hood Hinge covers with Ring Brothers hinges
bulletAdded Power Steering with Tilt Ididit column
bullet Classic Instruments "Authentic" series electronic gauge set
bulletAll new Painless wiring harnesses front to back
bulletAdded Vintage Air A/C w/Trinary switch to control cooling
bulletAdded Wilwood Hydroboost Power Brakes with adjustable proportioning valve
bullet Baer 14" Big Brake Pro+ 6 piston, yellow calipers all around
bullet CPP tubular A arms/QA1 Adjustable Front Suspension with sway bar
bulletCustom Magnaflow Stainless Steel Dual Exhaust - 2.75"
bulletTrunk mounted Optima Yellowtop battery with cutoff switch
bulletRushforth custom "Rated X" staggered wheels Front 18x7, Rear 19x9
bullet Nitto Invo Tires: 225 45ZR/18-Front, 255 35ZR/19-Back
bulletCustom Stainless Steel Gas Tank 20 gal
bulletPacific Fabrication/Tilden Motorsports in Gilroy built the car
bulletStart date: November 9, 2013  Completed: June 5, 2015 
bulletUpdated: 04/28/2018
 

Gallery of the Project

 

 

Beth Herner's 1936 Standard Sedan Restoration
 

Project to restore her 1936 Standard Sedan

Highlights so far:

bullet

Body and Paint

bullet

Disc brakes

bullet

New interior

See the Gallery here of the progress:

 

 

 

 

Copyright April, 2018
San Jose Classic Chevys